ARM® Cortex™-A7 / Cortex™-M4 核心板,支持最高1GHz的处理性能
Contact us to learn more
to talk to a technical sales engineer
phyCORE-i.MX7核心板支持NXP最新一代处理器i.MX7 单核/双核处理器。phyCORE-i.MX7核心板在紧凑的PCB中集成了DDR3,NAND,NOR,eMMC,千兆以太网PHY，RTC，电源管理IC以及高密度的外围接口，如PCIe, WIFI, Bluetooth, GPS, 显示接口，摄相头接口等。phyCORE-i.MX7核心板是医疗监护，工业HMI，手持仪器仪表的绝佳选择
Take a closer look
The phyCORE-i.MX7 System on Module
The i.MX7 Processor Family
The i.MX 7 series applications processor from NXP is the first device in the market utilizing both the ARM® Cortex™-A7 and ARM Cortex-M4 cores. This heterogeneous multicore architecture enables a single-chip solution that can run sophisticated operating systems and provide real-time responsiveness and general-purpose programmable processing.
- i.MX 7Single and i.MX 7Dual-Core applications processor
- Up to 2 GB DDR3
- Up to 8 GB NAND or 128 GB eMMC
- 3x SD/SDIO/MMC
- Dual USB HS 2.0 OTG, USB HS 2.0 HSIC Host
- Dual Gigabit Ethernet
- MIPI CSI (2 lanes)
- MIPI DSI (2 lanes)
- CAN, UART, SPI, I2C, SAI
- Linux BSP
|Architecture||ARM® Cortex™-A7 / ARM® Cortex™-M4|
|Processor||NXP i.MX 7Single-Core, i.MX 7Dual-Core|
|DRAM||1 GB default / 2 GB max DDR3|
|NAND||8 GB max|
|NOR||16 MB max|
|eMMC||4 GB default / 128 GB max|
|USB Host||HS 2.0 HSIC|
|USB OTG||2x HS 2.0|
|Ethernet (Mbit/s)||2x 10/100/1000 (1x PHY on SOM)|
|Display||TTL (24 bpp), MIPI DSI|
|Miscellaneous||ADC, Tamper Detection, GPIO, JTAG|
|Dimensions||41 x 50 mm|
|Connector||240-pin 0.5 mm pitch|
|Supply Voltage||3.3 V|
|Temperature||0 to 95буC or -20 to 105буC|
phyCORE-i.MX7 interfaces are routed to our high-density PCB interconnects on the underside of the SOM. Design the mating connectors on your carrier board.
The phyCORE-i.MX7 Single Board Computer Kit
- phyCORE-i.MX7 System on Module
- phyBOARD-i.MX7-Zeta Single Board Computer Carrier Board
- Linux BSP
- Evaluation Module: Provides RS-232, User buttons and LED, JTAG
The phyCORE SOM is designed to plug into a PHYTEC Carrier Board that provides the I/O connectors as well as any other interface circuitry not provided on the phyCORE module itself.
Carrier Board Features
- 2x RJ45 Ethernet
- USB Host (Standard-A Connector)
- USB-OTG (Micro-AB Connector)
- Micro-SD Card Slot
- Mini PCIe Connector
- LCD interface (24-bit TTL)
- Touch Screen Controller
- RTC battery backup
- Expansion interface
The default configuration of the SOM included in the phyCORE-i.MX7 kit features: NXP i.MX 7 dual-core processor, 1 GB DDR3, 4 GB eMMC, 4 KB I2C EEPROM, 10/100/1000 Ethernet PHY, and industrial operating temperature rating.
phyCORE-i.MX7 Board Support Packages
PHYTEC Board Support Packages (BSPs) are software bundles that implement and support operating systems on our System on Modules. PHYTEC BSPs are application development-ready, offering all essential drivers and board-level feature support. The only task left for you is application integration. This way, you can focus on your core competencies while we take care of the rest.
- Yocto Project Support
- Bootloader, kernel, file system
- Source BSP
Require in-depth support beyond our free offerings? See details here.
Find Quickstart guides, BSP downloads, and other useful information on our wiki.
Welcome to PHYTEC support! We pride ourselves in our excellent customer service. If you cannot find the help you need here, please call us and we will connect you with a live person who can assist you.
Need schematics for one of our products? Register here.